Start here

Pick the size before the brand

Too small a unit runs flat out and never reaches the set temperature. Too large a unit cools quickly, switches off early and leaves the room humid. The rule of thumb below is a starting point; glazing, a top-floor roof, a kitchen next door or a crowded room all push the number up.

Rule-of-thumb only, based on 120 sq ft per TR. Confirmed by a site check.
TonnageRough floor areaTypically used for
1.5 TRUp to about 180 sq ftCabins, small meeting rooms, boutiques
2 TRUp to about 240 sq ftLarge cabins, clinics, small restaurants
3 TRUp to about 360 sq ftConference rooms, showroom zones
4 TRUp to about 480 sq ftLarger halls and retail zones (4.5 TR units also available)
1.5 TR

1.5 ton cassette AC

The smallest cassette size suits a single cabin, consulting room or boutique where wall space is limited and you want a flush ceiling finish. It is also the size most often used in groups, for example one per cabin along a corridor.

  • Typical spaces: manager cabins, clinics, small meeting rooms
  • Check the ceiling void depth before choosing the model
  • Models we list: see below
2 TR

2 ton cassette AC

Two tons steps up for larger cabins, small restaurants and waiting areas. It is a common choice where the room is near-square and one central unit can cover it evenly.

  • Typical spaces: large cabins, clinics, small cafes
  • A west-facing glass wall can justify moving up a size
  • Ask for a quote by brand and series
3 TR

3 ton cassette AC

Three tons covers conference rooms and showroom zones. Above this size we compare one 3 TR cassette against two 1.5 TR units, or a ductable layout, because airflow reach and failure risk change.

  • Typical spaces: conference rooms, retail zones, banks
  • Compare against two smaller units for long rooms
  • Three-phase supply may be needed; we check on site
4 TR

4 ton cassette AC

Four tons suits larger halls and retail zones with a high ceiling load. At this capacity, ceiling structure, drainage and electrical supply need proper planning, and a ductable or VRF layout is often worth pricing alongside.

  • Typical spaces: halls, larger showrooms, training rooms
  • Ceiling support and drain route need planning
  • Compare with a ductable or VRF layout
Go deeper

Related guides and pages

Cassette AC price guide

What changes the cost and how to compare quotes.

Ductable vs cassette AC

Which suits your space.

Cassette AC service

Specifications, process and project photos.

Ductable AC by tonnage

For larger open floors.

AC tonnage sizing guide

How to size any AC properly.

Compare models

Filter and compare cassette models in the catalogue.

FAQs

Common questions

In our range cassette units run from about 1 TR to about 4.7 TR per unit. The 1 TR size is the DB Smart 1-way cassette. The sizing table below still walks through the common 1.5, 2, 3 and 4 TR steps, and 4.5 TR units are also available.

Need a cassette AC quote?

Send the room size, ceiling type and number of rooms. We reply within 24 hours.