AC Duct & AHU Cleaning installation by Sri Engineering Works
Ductable & AHU systems · Inspect, clean, report

AC Duct & AHU Cleaning

Cleaning of supply and return ducts, grilles, diffusers and air-handling units so ducted systems move air properly again.

24 h
Visit confirmation
Ducts + AHU
Systems covered
Report
Written findings after the visit
Overview

About Duct Cleaning

Ducted systems quietly collect dust, lint and moisture over the years. Dirty return grilles, clogged filters and coated coils restrict airflow, which shows up as weak cooling at the far outlets, a higher power bill, musty smells and noisy fans. Because the ducts sit above a false ceiling, the problem is easy to miss until comfort drops.

A proper duct cleaning job starts with an inspection to see how dirty the system really is and whether any duct sections are damaged, wet or poorly insulated. We then clean the accessible duct sections, grilles and diffusers, wash or replace filters, and clean the AHU or ductable-unit coil and drain, and finish with an airflow check at the outlets.

We do not recommend cleaning for its own sake. If the inspection shows light dust only, we will say so and advise a filter and coil service instead.

  • Better airflow to the far ends of the duct run
  • Fewer musty smells from wet filters, coils and drain pans
  • A clear picture of duct condition before you spend more
  • Fits naturally into an AMC for ducted systems
Supply duct runs with insulation above the false ceiling

At a glance

Systems
Ductable ACs, AHUs and ducted VRF indoor units
Scope
Accessible ducts, grilles, diffusers, filters, coil and drain
Start
Inspection and quotation
Finish
Airflow check and written report

Brands we install

VoltasDaikinDunham-BushO General
Request a proposal
Key features

What's included

01

Inspect first

We look at ducts, access points, filters, coil and drain before quoting any cleaning.

02

Grilles & diffusers

Return grilles and supply diffusers cleaned, since these are the first parts you see getting dirty.

03

Filters

Filters washed or replaced and the filter rack checked for air bypass.

04

AHU coil and drain

Coil, drain pan and condensate line cleaned to reduce odour and overflow risk.

05

Airflow check

Outlet airflow checked after cleaning so you can see whether the system is delivering.

06

Written report

A short report of findings, areas that could not be reached and recommended follow-up work.

Specifications

Technical parameters

SystemsDuctable ACs, AHUs and ducted VRF indoor units
ScopeAccessible ducts, grilles, diffusers, filters, coil and drain
StartInspection and quotation
FinishAirflow check and written report
CoverageHyderabad, Visakhapatnam, Vijayawada, Tirupati
Pairs withAMC visits and duct insulation or repair work
Applications

Where it's used

Showrooms & retail storesOfficesBanquet hallsHospitals & clinicsRestaurantsIndustrial floors
Our process

How we deliver it

  1. 1

    Site inspection

    Check access points, duct condition, filters and coil; agree the scope.

  2. 2

    Protect the site

    Cover furniture and work area so dust stays out of occupied space.

  3. 3

    Clean

    Clean accessible ducts, grilles, diffusers, filters, coil and drain.

  4. 4

    Test

    Run the system and check airflow at the outlets.

  5. 5

    Report

    Share findings and recommend follow-up work such as insulation repair.

FAQs

Duct Cleaning questions

There is no single interval. It depends on dust load, occupancy and filter care. We inspect first and recommend cleaning only when the system needs it, with filter and coil care in between.